当前位置: 首页 / 师资力量 / 材料学

材料学

  • Name:Alei DANG
    Professional Title:Associate Professor
    Research Interests:Plasmonic resonance, Energy storage,Carbon based nanomaterials, Two dimensional materials, Self-assembly.
    Courses: Material Physics, Solid State Electronics
    General Introduction:Prof. Alei Dang received his PhD in Material Science from Northwestern Polytechnical University (NPU). He was a Joint PhDstudent at Carnegie Mellon University(2011-2013)and a Post-doctoral Fellow at University of Pennsylvania from 2016 to 2018. He has published 80+ publications (h-index 32) in high impact journals, such as Nature, ACS sensors, et al. He is also the editorial board membermember of International Journals of Nanomanufacturing、Energy Storage and Conversion, and Green Carbon.
    Selected publications:
    Plasmonic Coupling of Au Nanoclusters on a Flexible MXene/GrapheneOxide Fiber for UltrasensitiveSERS Sensing.ACSSensors,2023,Volume:8, P1287-1298.
    Thickness-independent capacitance of vertically aligned liquid-crystalline Mxenes. Jenny Stanford Publishing,2023, P745-758.
    Efficient multiplexed label-free detection by flexible Mxene/graphene oxide fibers with enhanced charge transfer and hot spots effect. Sensors and Actuators:B.Chemical,2023, Volume:390,133888.
  • Name:Tingting TAN
    Professional Title:Associate Professor
    Research Interests:Photoelectric device based on films, Functional thin solid films
    Courses: Materials Physics, Physical Property of Materials
    General Introduction:Doctor TingtingTAN graduated from Northwestern Polytechnical University in 2010. Doc. TAN has published more than 30 papers in the field of thin solid films and photoelectric device.
    Selected publications:
    Preparation and characterization of large-sized CdZnTe epitaxial single crystal,Nuclear Inst, and Methods in Physics Research, Nuclear Inst. and Methods in Physics Research, A,2023,Volume:1056,168625.
    Growth of CdZnTe (211) epilayers on GaAs by close spaced sublimation as an alternative substrate for HgCdTe growth, Infrared Physics & Technology,2023, Volume:133,104857.
    Effects of annealing in Te2 atmosphere on photoelectric properties and carrier transport properties of CdZnTe films, Materials Science in Semiconductor Processing,2023, Volume:153,107158.
  • Name:Yangping LI
    Professional Title:Associate Professor
    Research Interests:Functional Thin Solid Films, Multifunctional Nano/Micro Structured Surfaces, Metallic grids for low resistive transparent conductors
    Courses: Introduction of Quantum Mechanics, Materials Physics, Functional Materials
    General Introduction:Doctor Yangping LI graduated from Northewestern Polytechnical University and obtained his doctorate degree in Materials Science in 2005. From Sept. 2012 to Sept. 2013, Doc. LI persued researches in preparation of ion-conducion films in Georgia Institute of Technology, School of Materials Science and Engineering as a visiting scholar under the support of Chinese Scholarship Council. Doc. LI has Published 50+ papers in the field of Thin Solid Films and Mico/Nano-Structured Surfaces.
    Selected publications:
    Fabrication of micro hole array on the surface of CVD ZnS by scanning ultrafast pulse laser for antireflection, Optical Materials, 2017, Volume: 66, P356-360.
    Infrared transmissive and rain-erosion resistant performances of GeC/GaP double-layer thin films on ZnS substrates, Applied Surface Science, 2013, Volume: 264, P538-544.
    Effects of hydrogen incorporation on structural, optical and electrical properties of germanium carbon films prepared with RF magnetron co-sputtering, Journal of Alloys and Compounds,2017,Volume:694,P647-652.
  • Name:Yu TONG
    Professional Title:Professor
    Research Interests:OptoelectronicMaterials,Semiconducting Nanomaterials,Metal Halide Perovskites
    Courses: Functional Materials, Solid State Electronics
    General Introduction:Yu TONG obtained his PhD degree from Ludwig-Maximilians- Universitat München(LMU, Munich), his major research interest is novel optoelectronic materials and devices. So far, Yu TONG has published more than 40 peer-reviewed research artides in pretigious hournals such as Advanced Materials, etc., with over 4000 times citations.
    Selected publications:
    Reducing Nonradiative Losses of Air-Processed Perovskite Films via Interface Modification for Bright and Efficient Light Emitting Diodes. Advanced Functional Materials, 2024, Volume:34, P7.

    Synchronous Optimization of Light Outcoupling and Carrier Recombination for Efficient and Spectral Stable Blue Perovskite Light-Emitting Diodes. Advanced Functional Materials, 2024.
    Spontaneous Self-Assembly of Perovskite Nanocrystals into Electronically Coupled Supercrystals: Toward Filling the Green Gap. Advanced Materials,2018, Volume: 30, P29.
  • Name:Ruihao CHEN
    Professional Title:Professor
    Research Interests:Metal-halide hybrid perovskite, Interface engineering,Crystallization regulation, Photovoltaics and light emitting devices, Large-area perovskite modules
    Courses: Frontier chemical materials
    General Introduction:Dr. Ruihao Chen received his Ph.D. degree from Xiamen University in 2021. Since 2022, he became a professor in materials science and engineering at Northwestern Polytechnical University (NPU) in Xi'an, China, His research focuses on the large-area perovskite solar modules. He has published 5 China invention patents and over 30 peer reviewed journal articles in Journal of the American Chemical Society, Angewandte Chemie International Edition, Advanced Functional Materials, and so on, including 5 ESI highly cited papers. He is youth editorial board member of Nano Micro Letters and guest editor of Materials. He once served as a reviewer for Nature Communication, Advanced Energy Materials, Decarbon, and ACS Omega journals.
    Selected publications:
    Conformal Imidazolium 1D Perovskite Capping Layer Stabilized 3DPerovskite Films for Efficient Solar Modules. Advanced Science, 2022, Volume: 9, n. 36.
    Sulfonate-Assisted Surface Iodide Management for High-Performance Perovskite Solar Cells and Modules. Journal of the American Chemical Society, 2021, Volume: 143, P10624-10632.
    High-Efficiency, Hysteresis-Less, UV-Stable Perovskite Solar Cells with Cascade ZnO-ZnS Electron Transport Layer. Journal of the American Chemical Society,2019,Volume: 141, P541-547.
  • Name:Shuangming LI
    Professional Title:Professor
    Research Interests:Alloy Solidification, Thermoeletric Materials, Refractory Alloys
    Courses: Solidification Technology, Metallurgical Principle, Metallic Materials and Heat Treatment
    General Introduction:Li Shuangming, Professor, visitor scholar ofMcMaster University in Canada. He has published more than 100 academic papers in the journal including Advanced Functional Materials, Advanced Energy Materials, Acta Materials and Scripta Materials, etc. These papers involve the processing-microstructure-properties of alloys and devices of thermoelectric materials.
    Selected publications:
    Fast Fabrication of High-Performance CoSb3-Based Thermoelectric Skutterudites via One-Step Yb-Promoted Peritectic Solidification. Advanced Functional Materials, 2023, Volume: 33, n.46.
    Ce-filled Ni1.5Co2.5Sb12Skutterudite Thin Films withRecord-High Figure of Merit And Device Performance. Advanced Energy Materials, 2023, Volume: 13, P1-12.
    Tip Splitting Dynamics in Degenerate Seaweed Patterns of Aluminum Alloys Induced by Anisotropic Surface Tension.Crystal Growth and Design,2023,Volume: 23,P2190-2195.
  • Name:Yi WANG
    Professional Title:Professor
    Research Interests:CME(Integrated Computational Materials Engineering), MGE (Materials Genome Engineering),Digital Twin; Intelegent Manufacturing
    Courses: Computational Materials Modeling and Design, Foundation of Materials Science and Engineering
    General Introduction:William Yi Wang received his MS and PhD degree from Pennsylvania State University in 2012 and 2013 and continuously worked as a postdoctoral fellow till May 2016. His research topic is the Knowledge-enabled Data-DrivenICME for Advanced Materials. He has authored and co-authored hundreds of publications in respectable peer-reviewed journals and applied 20 patents and software copyrights. He is the Principle Editor of Journal of Materials Research, the Youth Committee Editor Board member ofJ Mag. Ally,J Mater Infor. Etc
    Selected publications:
    Local lattice distortion mediated formation ofstacking faults in Mg alloys, Acta Materialia,2019, Volume: 170, P231-239.
    A brief review of data-drivenICME for intelligently discovering advanced structural metal materials: Insights into atomic and electronic building blocks,Joural of Materials Research,2020,Volume: 35, P872-889.
    Integrating data mining and machine learning to discover the high-strength ductile titanium alloys, Acta Materialia,2020, Volume: 202, P211-221.
  • Name:ZhongweiCHEN
    Professional Title:Professor
    Research Interests:1Processing of aviation aluminum alloy, 2 Micro and nano scale characterization, 3 High entropy alloys and quasicrystals
    Courses: 1Solidification processing of light metals and alloys, 2 Electronic micro-analysis, 3 Modern analytical testing methods
    General Introduction:Zhongwei Chen received his Ph.D. degree in materials processing engineering from The Northwestern Polytechnical University of China in 2001 and is now a Professor and doctoral supervisor at the school of materials science and engineering,NPU. From2006 to 2007, he worked as a visiting scholar at Sheffield University of UK. His research interests mainly involve in the Processing of aviation aluminum alloy and light alloys, micro-nano scale characterization of materials. He has about 50 papers included in SCI.
    Selected publications:
    In-situ TEM observation of the ITB evolution in aluminum deformation twinning, Scripta Materialia,2022, Volume:218, 114794.
    Investigation on microstructure, superior tensile property and its mechanism in A10.3CoCrFeNihigh-entropy alloy via thermo-mechanicalprocessing, Materials Science & Engineering:A,2023,Volume:866, 144690.
    In-situ TEM observations of nanovoid initiation and crack evolution in FCC phase of AlCoCrFeNi2.1eutectic high-entropy alloy, Materials Characterization, 2023, Volume:204,113206.
  • Name:Yongxin WANG
    Professional Title:Professor
    Research Interests:Metals and alloys, Phase transformation mechanism,Reconsideration reliability evaluation
    Courses: Computational Materialsand Modelling Design,Fundamentals of Materials Science
    General Introduction:Professor YongxinWANG,Vice dean of Queen Mary University of London Engineering School of NPU. Visiting scholar at the University of Toronto. He is expert of engineering education certification expert, member of the Shaanxi Provincial Teaching Steering Committee. Using computer simulation and experimental research, systematically study the microstructure and properties of advanced structural materials, as well as the phase transition mechanism. He has published over a hundred papers and has won prize for national-level teaching achievements and prize for scientific and technological achievements in Shaanxi Province.
    Selected publications:
    Studies on the abnormal effect of tensile strain on the MC→ M23C6in-situ transformation in Ni-based superalloy. Joural of Alloys and Compounds.2022,Volume: 923,166307
    Experimental and DFT studies on the initial precipitation behavior of M6C in Ni- based superalloy on atomic scale.Materials Characterization.2023,Volume:196,112640
    The formation of intragranular stress concentration in plastic deformed Ni-base superalloy:Governing factors and process. Materials Science and Engineering:A.2021, Volume:806,140820
  • Name:Zhen LI
    Professional Title:Professor
    Research Interests:perovskite solar cell, flexible electronics, solar energy havesting, carbon nanotube
    Courses: Nano-structured materials and nanotechnology, principle and applications of opotielectonics, Chemistry of Materials
    General Introduction:Prof. Zhen Li received his PhD degrees in MSE at Tsinghua University in2013. He worked as a postdoc in Nanyang Technological University and National Renewable Energy Laboratory from 2014 to 2018. He has joined NPU since 2018. He has authored more than100 peer-review publications in Nat. Rev. Mater., Nat. Comm., etc, and received over 10000 citations with an H index of 49.
    Selected publications:
    Scalable fabrication of perovskite solar cells, Nature Reviews Materials, 2018, Volume:3, P1-20.
    Hyperbranched polymer functionalized flexible perovskite solar cells with mechanical robustness and reduced lead leakage, Nature Communications, 2023, Volume: 4, P1-12.
    Block Iodide, Save Perovskite Modules, Joule, 2019, Volume:3, P2594-2595.
共28条 首页上页123下页尾页 /3页 跳转

联系我们

分校办公室: 8(727)-377-33-33转3183

招生办公室: +86-(29) 88494381

传真(Fax): +86 – 29- 88491544 电子邮箱: icoffice@nwpu.edu.cn

地址: 哈萨克斯坦共和国,阿拉木图市,阿里法拉 比大街71号31栋